48 port ODF Black Rack Mount SC/APC & SC/UPC fiber optic termination box

SFP BIDI 1.25G SINGEL MODE 20KM DDM 1310/1550 OPTICODE LC

PLC SPLITTER WITH CONNECTOR 1X16 SC-UPC
PLC SPLITTER WITH CONNECTOR 1X16 SC-UPC

Compatible TAA Compliant 10GBase-CU QSFP+ to 1xSFP+ Direct Attach Cable (Passive, 3m)

GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm,

The FC connector is a fiber-optic connector with a threaded body, which was designed for use in high-vibration environments. It is commonly used with both single-mode optical fiber and polarization-maintaining optical fiber.

FDB-16 Fiber Splitter Distribution Box FTT-FDB16 Type Optical Termination Box is designed to connect feeder/distribution cable to subscriber's drop cable using PLC splitter in FTTx networks. It has 2 input ports and 16 output ports on the bottom and it is e...

FDB-16 Fiber Splitter Distribution Box


FTT-FDB16 Type Optical Termination Box is designed to connect feeder/distribution cable to subscriber's drop cable using PLC splitter in FTTx networks. It has 2 input ports and 16 output ports on the bottom and it is easy to install on the wall or pole. The rear tray is for splicing a fiber of feeder cable with PLC splitter and the front tray is for connecting subscriber's drop cable through adaptor plate on the tray.

Slidable Rack-mount Fiber Optic Distribution Frame has aluminum sliding fittings with self-locking functions prevent the drawer from falling when moved; 19-inch rack mount for ST, SC, LC, MTRJ, FC,etc. adapters. And Fiber Quantity can be 12 core, 24 core, 48 c...

Slidable Rack-mount Fiber Optic Distribution Frame has aluminum sliding fittings with self-locking functions prevent the drawer from falling when moved; 19-inch rack mount for ST, SC, LC, MTRJ, FC,etc. adapters. And Fiber Quantity can be 12 core, 24 core, 48 core, 96 core etc.The drawer is the holding board for splicing, easy to withdraw the fibers when testing and distributing.

CFS-3D Tri-hole Stainless Steel Fiber Optic Stripper

Model: V1600G0-B
Spec: 4*GPON,2GE(RJ45)+2*10GE(SFP+) Dual power modules available in DC/AC
Net Weight: 2.95kg / Gross Weight: 4.15kg

A fiber optic adapter, sometimes also called a coupler, is a small device designed to terminate or link the fiber optic cables or fiber optic connectors between two fiber optic lines. By linking two connectors precisely, fiber optic adapters allow the light s...

A fiber optic adapter, sometimes also called a coupler, is a small device designed to terminate or link the fiber optic cables or fiber optic connectors between two fiber optic lines.

By linking two connectors precisely, fiber optic adapters allow the light sources to be transmitted at most and lower the loss as much as possible. At the same time, fiber optic adapters have the merits of low insertion loss, good interchangeability and reproducibility. FS supplies a wide range of mating sleeves and hybrid adapters, including special male to female hybrid fiber optic adapters.

*Single holed(preshrunk)ends eliminates improper fiber threading *Smooth,deburred stainless steel reinforcing member ends decrease the riskof fiber damage during installation *Extended liner length prevents contact between the fiber and ther backbone *Clear...

*Single holed(preshrunk)ends eliminates improper fiber threading

*Smooth,deburred stainless steel reinforcing member ends decrease the riskof fiber damage during installation

*Extended liner length prevents contact between the fiber and ther backbone

*Clear sleeve design persign permits easy centering of splice before heating

*Sealing structure makes the splice free from effect of temperature and humidity from environment

Operating temperature -45oC to 100oC

Minimun fully recovery temperature 120oC

Compact for small application areas like in closure or splice trays
Wide Operating Temperature and Wavelength
Excellent Environmental & Mechanical Stability

PLC Splitter is based on the Planar Waveguide Technology. It provides a low cost lift distribution solution with small form factor and high reliability.

Low Insertion loss

Low PDL

Wide Operating Wavelength

Compact Design

FC/UPC Female to SC/UPC Female Hybrid Simplex Single Mode/Multimode Copper Fiber Optic Adapter/Coupler with Flange

Wall Mount ODF is designed to manage fiber splices and patching of fiber links with ease of maintenance for installers. This wall mount optical fiber distribution includes double door access and keyed entry. It is suited to patching cables in controlled environments and offers efficient storing excess fibers.

OS1 OS2 LC to LC(Female to Female) Duplex Fiber Optic Adapter/Coupler with M2*6MM Screw. LC adapters uses ceramic sleeve to connect between two LC fiber Optic cables. Adapters can lock the connectors and get low insertion loss to transmission optical signal. O...

OS1 OS2 LC to LC(Female to Female) Duplex Fiber Optic Adapter/Coupler with M2*6MM Screw.
LC adapters uses ceramic sleeve to connect between two LC fiber Optic cables.
Adapters can lock the connectors and get low insertion loss to transmission optical signal.
Our LC fiber optic adapter are suitable for fiber patch panel, which means you can use them in any type of enclosure with rectangular cutouts.

This coupler consists of a SC simplex female on one end and a SC simplex female on the other end. It is typically used to connect two SC simplex male APC polished cable assemblies.

12 port ODF SC/APC & SC/UPC fiber optic termination box

96 Port ODF Optical Fiber Distribution Frame ODF